RC-Project Kit Steering Balls "Reverse" In Ergal 7075-T6 For HB Racing D819/D817V2/E817V2

The Steering Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ.

In addition, a Teflon Coating was carried out to reduce the coefficient of friction with the Uniball.

Tolerances have been revised with respect to the Original Balls to eliminate excessive play and increase the life of the Uniball.

The weight of the Kit is 2.50g.

Replacing Articles HB67206.

Kit of 4 Pcs.

"Reverse"

To ensure greater safety we have developed balls that are mounted contrary to the Standards; in this way, in the event of a strong collision, it is impossible for Uniball to leave its premises, thus avoiding the risk of unforeseen breakages.

Unlike the Original Balls that are mounted with M3X20 Socket Head Screws and the corresponding Nuts, the REVERSE Balls have an internal M3 Thread; this allowed to eliminate the Original Socket Head Screws and the Nuts replacing the whole with Socket Head Screws M3x12 included in the Kit.

This will Guarantee a more Rigid and Secure Assembly compared to the Original ones.