RC-Project Shock Pins in Ergal 7075-T6 for TEKNO RC NB48.4-EB48.4

The Shock Pins are Made in Italy, with latest generation Swiss type lathe center.

Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ.

Diameters have been modified with respect to the Originals to have a better coupling between Pin, Arm and Ball.

The Black pins have the right-hand thread and the Gold pins have the left-hand thread, there is also a Laser engraving which indicates the Direction and the type of Threading.

The Diameter of the Thread has been increased by 0.05mm to be able to adapt even to non-new arms.

Developed and Tested in collaboration with Luca Albanese.

The weight of the Kit is 1.80g.

Replacing Article TKR1240.

Kit of 4 Pcs.